Тайлбар
Product Overview for model NPACK-50G small bottles filling capping labeling line
Suitable for the applications of 5-100ml liquid filling and sealing in pharmaceutical industry, the YX-50G Small Dose Liquid Filling Machine is with reasonable structure, high precision indexing table for filling, capping, cap pressing,precision peristaltic pump filling; The machine is controlled by the PLC with the advantage of easy operation and maintenance. There is the system for functioning as no filling without bottles feeding, no plugging without bottles sensoring, no capping without pluggers. The filling line, made of the stainless steel as its platform for working ,is in line with GMP standard. The machine controlled by pneumatic and electric dual system in the machine adopts the mechanical transmission, which can transmit the power in stable and lower power-consumption plus the accurate positioning features .The filling line is especially used in the mass production .
Application of machine filling line :
II. Main Technical Parameter of filling capping labeling line :
Model NPACK-50G
Filling Volume 1-150ml
Output 30-50 Bottles/min
Нарийвчлал ± 1% -иас бага
Power Supply 220V/50Hz (customized according to customer's requirements)
Зураг авах 99% -иас их
Stoppering rate more than 99% Labeling rate more than 99%
Агаарын хангамж 1.3 м3 / цаг 0.4-0.8Mpa
Хүч 2.0 кВ
650 кг жинтэй
Dimension 6000*3200*1750mm
Basic configuration of Filling line
Тоо | Зүйл | Брэнд |
1 | PLC | MITSUBISHI(Japan) |
2 | Цилиндр | AirTAC (Taiwan) |
3 | Peristaltic pump | Хятад улс |
4 | Conveyor belt slat | Хятад улс |
5 | Reducer box | Zhongda(Taiwan) |
6 | Мэдрэгчтэй дэлгэц | WEINVIEW(Taiwan) |
7 | Electromagnetic | SHAKO (Taiwan) |
8 | photoelectric | Autonics (Korea) |
9 | Гэнэт зогсоох | Schneider(French) |
10 | Contact Materials | 316LStainless |
11 | Релей | OMRON(Japan) |
12 | AC contactor | Schneider(French) |
13 | Солих | Schneider(French) |
14 | Хөрвүүлэгч | DELTA(Taiwan) |
15 | Мотор | Shanghai Maily |
Spare parts for filling monoblock
Тоо | Зүйл | Quantity |
1 | Brush | 1 ширхэг |
2 | Silastical bar for feeding | 2pcs |
3 | Silastical bar for output | 2sets |
4 | Solenoid valve | 1 ширхэг |
5 | Throttle | 2pcs |
6 | Glass Valve | 2pcs |
7 | Motor Belt | 1 ширхэг |
8 | Synchronizer belt | 1 ширхэг |
9 | 82.6mm belt slat | 5sets |
10 | Open-ended spanner | 1set |
11 | Hex Wrench | 1set |
12 | Slotted screwdriver | 1set |
13 | Plus screwdriver | 1set |
14 | Spanner | 1set |
III.Main parts &working principle
Bottles caps &inner plugger vibrator
1. The machine is constituted of such parts as conveyor belt, sketch of machine, vibrator for bottles & caps, peristaltic pump etc.
2. Prepare sufficient bottles, plugs, caps and liquid. The plugs and caps shall fill fully the vibrating tracks and at the plugging and capping work stations. The bottles are to be delivered by conveyor belt to the indexing star wheel, then the bottles will be delivered intermittently by the indexing star wheel to the filling, plugging and capping positions.
3. The liquid is to be sucked in by the peristaltic pump and then delivered by the silicone tubes. Finally the liquid will be filled into the bottles by the needle tubing which are moving automatically up and down. For each moving up and down the needle tubes, two cycles of filling is done. The filling is completed by the cyclic insertion of filling nozzles into the bottles. With no-bottle detecting photoelectric eye ,if there is no bottles on the work station, the peristaltic pump stops work as no bottles can be detected.
4. The plug vibrating bowl delivers the plugs to the plug inserting station, meanwhile the filled bottles are transferred intermittently by the indexing star wheel to the position under the plugging station.
5. Then the cylinder drives the plug inserter to dive downward and push the plugs into the bottles. The plug inserted bottles will be transferred by the indexing star wheel to the cap falling and capping stations
6. The capping head spins and moves up and down as a whole. When the bottles stop under it, the downward capping head clutches the caps and finishes capping. With plug detecting photo-electric eye, once there is no bottles on station or there is bottle but no cap, then the cap pressing mechanism will stop motioning as no inner plugs can be detected. By doing this, the finished product can be avoid being without inner plugs. The capping is mainly achieved by the up and down spinning motions,
The capped bottles are delivered to the end of machine and the next cycle is ready.
Maintenance
1 the Машиныг сунгаж, машины ажиллагааг оновчтой болгохын тулд машиныг шалгаж, засвар үйлчилгээ хийх шаардлагатай;
Ihe working machine should be maintained every three month; The bearing and gear transmission part must be lubricated with the grease; The lubrication must be done periodically; The slide way oil (N68) should be added into the part like reciprocating mechanism motion or lifting two times every day; The automobile oil(N68) should be added into the rotary or swinging parts; Every half month add the grease into the cam slot; Every month one time for oil nozzle by adding the grease;
2 Бөөгнөрөл, хөгц гэх мэт хэсгүүдэд холбогч бөөгнөрсөн гадаргууг цохих, хусах зорилгоор хэзээ ч металл багаж бүү ашигла.
3.Хэрэв машин удаан хугацаагаар ажиллахаа больсон бол дамжуулалт эсвэл даацын хэсэг гэх мэт хэсгүүдэд тосолгооны зориулалттай тос нэмнэ; Мөн машиныг усны хамгаалалттай эмчилнэ.
4.Never put any objects on the machine lest it damage the machine.
5. Бүрэлдэхүүн хэсгүүдийн доторхи тоосыг үе үе цэвэрлээд бүх боолтыг шалгаж, суллагдсан шурагыг засаарай.
6. Терминалууд дахь боолтыг тодорхой хугацаанд утастай эсэхийг шалгаж, шураг бэхэлсэн эсэхийг шалгана уу;
7. Цахилгаан хайрцагнаас сунгасан утасны замд сул станц байгаа эсэхийг шалгана уу; Хэрэв хэсэг нь хэтэрхий сул байвал цахилгаан гоожиж болзошгүй дулаалгын давхаргад элэгдэл, эвдрэл гарахаас сэргийлж боолтыг дахин засна уу;
8. Хялбархан өмсдөг муурыг шалгаж, гэмтсэн хэсгийг нэг удаа өөрчлөх;
Packaging & Transportation
Машиныг хэзээ ч хэвтээ эсвэл босоо байдлаар байрлуулж болохгүй; Машины хөлийг салгаж, бүхэл бүтэн машиныг кратын ёроолоор нь бэхлээрэй. Машин нь тээвэрлэх явцад крат эсвэл сэгсрэх станцаас сул тавиагүй байх ёстой.
Машины сав баглаа боодол нь төвийг сахисан байх ёстой; Машиныг хөдөлгөхдөө сэрээтэй ачааны машин эсвэл тогорууг ашиглаад тогтвортой хөдөлгөөнөөр машиныг доороос нь хөдөлгөнө үү. Доорх зурган дээрх зургийг анхаарч үзээрэй; машин өргөх, дүүжлэх үед кран машинтай холбоо барихыг хориглоно. Машиныг 4 ширхэг M16X200 боолтоор засаад дараа нь машин өргөх, дүүжлэх зориулалттай тогоруу ба боолтыг холбоно. Үүний зэрэгцээ машины доорхи хамгаалалтын объектуудыг дэрлэв. Шаардлагатай бол бэхэлгээг тогтвортой өсгөхөд ашиглана (инжир доор доор үзүүлэв)
Кратын хайрцгийг задлахаас өмнө крат дээр ямар нэгэн гэмтэл байгаа эсэхийг шалгах; Хэрэв тогоонд ямар нэгэн хохирол учирвал тэр хайрцгийг онгойлгож, тээврийн компанитай яаралтай холбоо бариарай. Тээвэрлэлтийн ажилчдаас хийсэн шалгалтын дор кратыг онгойлгож, явцыг тэмдэглэ;
Аюулгүй байдлын хувьд forklift ачааны машины газар хүртэлх зай 1м-ээс доош байх ёстой; Хэрэв машин хөдөлж буй кран ашиглаж байгаа бол зайг 2метрээс 2.5метр хүртэл байлгах хэрэгтэй